View Source

Daily Operating Procedures

Store - Operational Procedures > Wally Milk Operating and Cleaning Procedures > image-20211213-020954.png

Complete coffee machine opening procedures and ensure Wally is plugged in, and power is on.

NOTE: If the coffee machine is off, the Wally will take approx. 20 mins to heat up before it can be used.

Store - Operational Procedures > Wally Milk Operating and Cleaning Procedures > image-20211213-021023.png

Store - Operational Procedures > Wally Milk Operating and Cleaning Procedures > image-20211213-021028.png

Press the programming encoder and select “recipe steaming.”
Once the Wally has heated up sufficiently, it will display “ready to steam” on the top of the touch screen.

Store - Operational Procedures > Wally Milk Operating and Cleaning Procedures > image-20211213-021133.png

Fill milk jug and place on platform underneath the steam wand. Ensure the jug is lined up with the steam wand and the jug is sitting correctly in the divot.

NOTE: Do not overfill the milk jug. Doing this will cause it to overflow during the steaming process.

Store - Operational Procedures > Wally Milk Operating and Cleaning Procedures > image-20211213-034005.png

Select coffee recipe, then press the steam button.
The steam wand will then lower down into the milk jug and start steaming the milk.

Store - Operational Procedures > Wally Milk Operating and Cleaning Procedures > 241664936_1939066679585993_8478102634299933847_n.jpg

Ensure the steam wand has been wiped thoroughly and there is no excess milk build up left on the steam wand.

Store - Operational Procedures > Wally Milk Operating and Cleaning Procedures > image-20211213-033944.png

NOTE: Ensure you are purging the steam wand every 15-30 mins to avoid any excess milk build up inside the steam wand.
You will be able to purge by holding down the steam button and the wand will automatically lower and purge.

Daily Cleaning Procedures

Store - Operational Procedures > Wally Milk Operating and Cleaning Procedures > 241676281_867192973931249_7537344019474003994_n.jpg

Hold the steam button down and the steam wand will lower and purge. This will help ensure any excess milk has been purged out.

Ensure the steam wand has been wiped thoroughly and there is no excess milk build up left on the steam wand.

Store - Operational Procedures > Wally Milk Operating and Cleaning Procedures > 241649420_363422628827312_3807068332996778617_n.jpg

Take off the metal holder and pull out the drain tray.

Ensure platform and drain tray has been wiped down and cleaned out thoroughly.

NOTE: Take care in pulling out the drain tray and assembling back together. You will need to ensure the drip tray and platform have clicked back in correctly after cleaning.

Store - Operational Procedures > Wally Milk Operating and Cleaning Procedures > 241690780_667864507511056_2611125356772757506_n.jpg

Wipe down the outside of the Wally to clean off any excess milk with a damp cloth.

Do not use chemicals as this may potentially cause damage to the exterior.