1

ON/OFF Icon

Used to turn the microwave combination oven on and off.

Pressing this icon off does not isolate the appliance from the electricity supply.

2

Touch Screen Control Panel

When the appliance is switched on the touch screen illuminates the user interface.

4

USB Port

A USB socket allows updates to programs stored on the appliance.

6

Appliance Door

The door is a precision-made energy barrier with three microwave safety interlocks. Always keep it clean and do not use it to support heavy objects.

7

Air Filter

The air filter situated at the lower front of the appliance is part of the ventilation system. Keep it free of obstruction and clean it daily. The appliance should not be operated without the air filter fitted.

8

Door Handle

The door handle is a rigid bar which is pulled downwards and away from the appliance to open it.

9

Door Seals

The door seals ensure a tight seal around the door. Always keep them clean and check regularly for signs of damage.

11

Cavity

The cavity (cooking chamber) is constructed from stainless steel and used for cooking products. Keep it clean by following the cleaning instructions.

12

Cook Plate

The cook plate is flat and square with all four sides having circular dips for easily fitting onto the cavity support stubs (two on each side). Both sides of the cook plate can be used for cooking and all sides are designed to fit onto the cavity support stubs.

1. Make all the relevant safety checks and ensure the appliance is clean, empty and plugged in.

2. Switch the appliance ON by selecting the power icon on screen

Open

3. Once booted the Merrychef splash screen appears, giving the options of "information" or "settings" shortcuts. The unit will automatically start heating up to temperature

Open

4. During preheating, the display shows the progress as the cavity heats up to the set temperature

Open

Recipe Creation/Development Mode

‘Recipe creation’ enables multistage cooking profiles to be developed, then stored under a name and icon for reuse.

Press & Go

'Press & Go' allows quick access to use the cooking profiles that are already stored.

Cookbook

'Cookbook' contains the cooking profiles stored in the memory of the appliance. It displays favourites, cooking profile groups and a complete listing of all cooking profiles available.

Cleaning

'Cleaning’ allows the appliance to be prepared for cleaning with pictorial displayed assistance during the cleaning process.

Temperature Change

Preheats are used to control the appliance operating temperature, up to 6 preheats can be stored for the appliance.

Setting

'Settings' are used to control the appliance settings and functions including time and language, loading cooking profiles and for service and maintenance purposes.

1. Open the appliance door and place the prepared food in the oven

2. Close the door and select the required setting

Open

3. Follow the required prompts on the screen

Open

4. Wait for the cooking process to finish

Open

5. An audible signal is given when the cooking process is finished, follow the prompts displayed

6. Open the appliance door and take the cooked food out with tongs or

Cavity and appliance door

Clean by hand with a chux cloth / paper towel

Merrychef Oven Cleaner

Merry Check Oven Protector

Air Filter

Clean by hand with chux cloth / sponge. Rinse off after with water and dry before refitting

Detergent

Outside of appliance

Clean by hand with a chux cloth

Stainless Steel Cleaner or All Purpose Cleaner

Containers, baking sheets, shelf grills and other accessories used for cooking

Clean by hand with a green scourer. Rinse off after with water

Detergent

1. Select the ‘cleaning’ icon from the Home screen

Open

2. Gather all required equipment for cleaning
   
   

Open

3. Select the green tick at the bottom of the screen to progress through the cleaning sequence

Open

4. The cool down timing progress is displayed and takes approximately 20 minutes

Open

5. Once cooling is complete, carefully remove the cool down pan from the cavity wearing heatproof gloves

Open

6. The oven is now ready for cleaning and a prompt appears on screen

Open

7. Apply the Merrychef Oven Cleaner to the cavity and let sit for 5-10 minutes

Open

8. Clean the cook plate and accessories
   
   

Open

9. Clean the oven using a green scourer. Wipe off the cleaner with a wet chux and dry using paper towel

Open

10. Spray the Merrychef Oven Protector onto a clean cloth and wipe over cavity sides, back, base and oven door

Open

11. Gently wipe clean the area around the door seal and replace the cook plate

Open

12. Open air filter cover and lift off magnetic air filter. Wash filter with warm soapy water and dry with paper towel

Open

13. Confirm you have cleaned the air filter
    
    

Open

14. Wipe down the exterior of the oven using Stainless Steel Cleaner and paper towel

Open

15. Cleaning is now complete, ensure the oven is turned off
    
    

Open

16. Enter your initials in the cleaning sign off
    
    

Open

17. The oven will power down and return to the power button screen once complete

Open

The appliance does not work, and the display screen is blank

The appliance has no power

• Check if there is a power cut.

• Check if the isolator switch is ON or the appliance is plugged in correctly.

Some screen controls do not work

Unauthorised access

Contact an authorised user.

Display shows a warning message

Details are shown on screen

Follow the instructions displayed.

The appliance does not cook the food correctly

• Appliance is not clean

• Food not at correct temperature

• Modified or wrong program selected

• Food wrapped

• Food removed early

• Clean the appliance (see above instructions).

• Use the correct cooking program.

• Unwrap food.

• Check if all the cooking stages have been followed correctly.

The appliance does not finish cooking

• Warning message displayed

• The appliance door is open

• No air filter or incorrectly fitted

• Overheating of the appliance

• Close the appliance door.

• Refit the air filter.

• Allow the appliance to cool down.

• Check and remove any restrictions around the air vents.

Display shows an error code

Malfunction of the appliance

Note the error code and contact your service agent.

Phone number:

(02) 8833 4111

Fax number:

(02) 8833 4122

Email address:

nswsales@moffat.com.au

Phone number:

(07) 3630 8600

Fax number:

(07) 3630 8622

Email address:

qldsales@moffat.com.au

Phone number:

(03) 9518 3888

Fax number:

(03) 9518 3833

Email address:

vsales@moffat.com.au

Phone number:

(03) 9518 3888

Fax number:

(03) 9518 3833

Email address:

vsales@moffat.com.au

Phone number:

(08) 9413 2400

Fax number:

(08) 9202 6836

Email address:

wasales@moffat.com.au

Phone number:

(03) 9518 3888

Fax number:

(03) 9518 3833

Email address:

vsales@moffat.com.au