/
Eversys Enigma Cleaning and Operating Guide

Eversys Enigma Cleaning and Operating Guide

Owned by Isabella Runge (Unlicensed)
Nov 22, 2023
5 min read

Operations

Start Up

  1. Wake up machine with Standby button. If the machine is already switched on and in standby mode, press and hold (3s) the standby button (1) to power up.

  2. Remove grounds draw and carefully empty liquid from previous clean. Wash grounds draw in sink.

  3. Place grounds draw back in machine.

  4. Press the purge/rinse button on the main screen. After, wipe the steam wand with a damp milk cloth.

  5. Fill bladder fridge with milk bladders. Ensure they are pushed back all the way to prevent spilling.

NOTE: Fridges must be 5 degrees and below. Take temperature every morning.

  1. Fill the hoppers with fresh coffee beans.

  2. Press the extraction time routine and let the machine dial itself in. Ensure it is the correct recipe for the day. Test both group heads for consistency.

  3. Test the automatic milk and auto steam wand. Ensure temperature reached is 60 degrees with a thermometer.

Preparing Espresso

  1. Adjust the coffee spout height to suit the drink you are preparing

  2. Place required cup/s under the coffee outlet.

  3. Press one of the double coffee products available (e.g. 2x Espresso).

  4. Wait for the product to dispense.

Hot Water

  1. Place a cup under the the hot water outlet.

  2. Press the hot water product.

  3. Wait for the product to dispense.

CAUTION: HOT WATER. HANDLE WITH CARE.

Hot Milk

Automatic

  1. Place empty milk jug under milk spout.

  2. Select required milk option on screen.

  3. Wait for product to dispense.

Manual

  1. Before using the steam wand, press the purge button to evacuate air from possible
    condensation.

  2. Insert the steam wand in the milk frothing pitcher.

  3. Turn on steam wand a texture milk.

  4. Turn off and purge.

  5. Wipe steam wand with designated cloth.

Cleaning

Chemical Clean

Frequency - Every day

WARNING: CAUSTIC CHEMICAL. HANDLE WITH CARE. SDS SHEET MUST BE ON SITE.

CAUTION: PPE REQUIRED - GLOVES AND GOGGLES.

  1. Press the menu to locate the rinse button and hold button for 3 seconds to run automatic cleaning.

  1. Press YES or NO to cancel.

  1. The system will commence performing rinse cycles, will distribute a coffee cleaning ball and brews in the chamber. Cleaning and Wash cycles are performed automatically.

  1. Empty and clean the grounds drawer when the screen prompts you to complete.

  1. Remove the milk bladders from the fridge. Wipe over internal and external parts of fridge with all purpose cleaner and a damp cloth.

  1. Place two pumps of the the Everclean chemical into each of the cleaning chambers (6). Do not use these containers for any other use.

CAUSTIC CHEMICAL

  1. Place the milk tube inside the cleaning tank. Ensure that it correctly lays at the bottom
    of the tank.

  2. Place the empty cleaning tank inside of the fridge. Press continue on screen.

  1. Wait for the cleaning to run through the process. While you are waiting refer to drip tray, screen and other cleaning below.

  1. When cleaning is finished, remove and clean the milk cleaning tanks, discarding water residue in sink. Store safely with chemicals.

  2. Clean the milk tank tube with a damp single-use cloth to remove any chemical residue.

  1. Empty the grounds drawer in a sink and clean it. Clean inside the machine with a soft cloth. Rinse, dry and return to position.

 

 

Grounds Drawer

Frequency - As needed everyday

  1. Move the coffee outlet (1) all the up and remove the grounds bin drawer (2).

  2. Clean and dry the grounds bin drawer.

  3. Clean inside the machine with a soft cloth.

  4. If necessary, clean beneath the machine.

  5. Put the grounds bin drawer back to its original position.

 

Grinder Cleaner

Frequency - Check once a week

WARNING: Switch off machine before carrying out any operation on the cleaning balls dispenser to prevent minor injury.

  1. Switch off at the main power switch.

  2. Remove the lid (1) and check that there are no blocked or broken cleaning balls in the dispenser (3).

  3. If necessary, clean the dispenser and remove the blocked or broken cleaning balls.

  4. Refill with coffee cleaning balls.

NOTE: Make sure there are no broken cleaning balls.

Bean Hopper

Frequency - Once a week

  1. Switch off at the main power switch.

  2. Remove the bean hopper lids (1).

  3. Unlock the bean hoppers (2) (Closed position).

  4. Remove the bean hoppers (3) and store the beans for re-use.

  5. Clean the bean hoppers (4) with all purpose cleaner, rinse with water and dry with a soft cloth.

  6. Reassemble in the reverse order and lock the bean hoppers (5) (Open position).

NOTE: Make sure that the bean hoppers are perfectly dry before refilling with coffee beans.

Display Screen

Frequency - When needed

  1. Press on the top middle of the touch screen (1).

  2. Press on the Clean the screen button (2).

  3. During the countdown, disinfect the screen according to the following recommendation.

WARNING: Never spray any liquid directly onto the surface.

Drip Tray

  1. Remove the drip tray grid (1).

  2. Wash the grid and inside of the drip tray (2) with soft soap and rinse.

  3. Put the drip tray grid back to its original position.

NOTE: Make sure that the drip tray lays flat.

 

Safety Data Sheets

Coffee Cleaning Balls

Milk Line Cleaner

Troubleshooting

 

Related content