Operations

Never try to override the safety systems.
Never insert an object into the preparation.
Never switch the appliance on unless it has been placed in the preparation bowl.
Before dismantling the foot, bell or whisk always check that the power mixer is unplugged.

Follow steps 1 to 3 above, then:

Change the speed of the motor by turning the variable speed button (MV) towards the maximum or minimum as required

Cleaning

Chemical - Suma Surface Sanitiser + Suma Multi-Purpose Cleaner

Procedure to follow should the stick blender become accidentally immersed during use.

Do not touch the blender, the container, or the worktop.
Unplug the blender from the wall socket.
Lift the blender out of the preparation.
Tilt the blender to allow as much of the liquid to drain out as possible.
Do not switch the blender back on, as there is still a risk of electric shock. Blender will need to be serviced.

The blender must be clean between each job thoroughly.

Fill a jug with hot water and Suma Surface Sanitiser. Pulse blender in sanitiser for 10 seconds. Do not submerge motor.	Wipe dry. Dismantle the blender as demonstrated in “Assembly and Operations” video.
Remove blade from end of blender using the tool provided. Caution: Sharp Objects. Handle with care.	Spray and wipe parts with Suma Multi-Purpose Cleaner.